Abstract
Recently, natural fibre composites are widely used in aerospace industries due to their good specific
mechanical properties, better acoustic properties, light weight, readily availability, biodegradability, recyclability, etc.
In this study, the hemp fibre woven fabrics / polypropylene based honeycomb sandwich structure were proposed for
aerospace applications. Firstly, the hemp fibre woven fabrics based honeycomb sandwich structures were
manufactured and experimental mechanical tests (compressive and flexural) were performed in the laboratory.
Numerical simulation was also performed and analysed to validate the proposed methodology. Different complex
shaped aircraft part CAD models were created and numerical analysis was carried out in order to have a better
understanding about the complex honeycomb sandwich structures.
Address
Sheedev Antony, Abel Cherouat: University of Technology of Troyes, GAMMA3-INRIA 12 rue Marie-Curie, BP 2060, 10010 Troyes, France
Guillaume Montay: University of Technology of Troyes, LASMIS 12 rue Marie-Curie, BP 2060, 10010 Troyes, France
Abstract
An alternative to the multilayered preforming is to use structures reinforced through-the-thickness in order to manufacture thicker and more complex pieces. Stitching technology is developed to bind dry reinforcements together or to strengthen composites in thickness performance by inserting structural yarns. Tufting process represents the simplest one-sided sewing technology and it is specifically designed for dry preform/liquid composite molding process route. Currently, the tufting technology is getting more and more interest due to its simplest and efficient process where it involves the insertion of binder threads via a single needle through the fabric. This technique of reinforcement through-the-thickness requires only one access to the preform which makes it suitable for three-dimensional structures and complex shaped textile composites. This paper aims to improve the understanding of the mechanical performance of tufted structures. An experimental study was developed, which included tensile and bending behaviours of tufted and un-tufted preforms, in order to evaluate the effect of tufting on the mechanical performance of dry preforms. The influence of the process parameters (tufting density, loop length, tufting yarns...) on the on the mechanical performance of the final structure is also highlighted.
Abstract
High Altitude and Long Endurance (HALE) aircraft are capable of providing intelligence, surveillance
and reconnaissance (ISR) capabilities over vast geographic areas when equipped with advanced sensor packages. As
their use becomes more widespread, the demand for additional range, endurance and payload capability will increase
and designers are exploring non-conventional configurations to meet the increasing demands. One such
configuration is the joined-wing concept. A joined-wing aircraft is one that typically connects a front and aft wings in
a diamond shaped planform. One such example is the Boeing SensorCraft configuration. While the joined-wing
configuration offers potential benefits regarding aerodynamic efficiency, structural weight, and sensing capabilities,
structural design requires careful consideration of elastic buckling resulting from the aft wing supporting, in
compression, part of the forward wing structural loading. It has been shown already that this is a nonlinear
phenomenon, involving geometric nonlinearities and follower forces that tend to flatten the entire configuration,
leading to structural overload due to the loss of the aft wing\'s ability to support the forward wing load. Severe gusts
are likely to be the critical design condition, with flight control system interaction in the form of Gust Load
Alleviation (GLA) playing a key role in minimizing the structural loads. The University of Victoria Center for
Aerospace Research (UVic-CfAR) has built a 3-meter span scaled and flexible wing UAV based on the Boeing
SensorCraft design. The goal is to validate the nonlinear structural behavior in flight. The main objective of this
research work is to perform Ground Vibration Tests (GVT) to characterize the dynamic properties of the scaled flight
vehicle. Results from the experimental tests are used to characterize the modal dynamics of the aircraft, and to
validate the numerical models. The GVT results are an important step towards a safe flight test program.
Key Words
experimental modal analysis; ground vibration testing; ISR; joined-wing; UAV; FE update
Address
José Carregado: Former graduate assistant at the University of Victoria
Stephen Warwick, Jenner Richards and Afzal Suleman: Center for Aerospace Research, University of Victoria, 9800 McDonald Park Rd, Sidney, V8L 5W5, Canada
Frode Engelsen: Structures Technology Dept., The Boeing Company, Seattle, Washington 98124, United States of America
Abstract
As the industrial desire for a step change in productivity within the manufacture of composite structures increases, so does the interest in Through-Thickness Reinforcement technologies. As manufacturers look to increase the production rate, whilst reducing cost, Through-Thickness Reinforcement technologies represent valid methods to reinforce structural joints, as well as providing a potential alternative to mechanical fastening and bolting. The use of tufting promises to resolve the typically low delamination resistance, which is necessary when it comes to creating intersections within complex composite structures. Emerging methods include the use of 3D woven connectors, and orthogonally intersecting fibre packs, with the components secured by the selective insertion of microfasteners in the form of tufts. Intersections of this type are prevalent in aeronautical applications, as a typical connection to be found in aircraft wing structures, and their intersections with the composite skin and other structural elements. The common practice is to create back-to-back composite \"L\'s\", or to utilise a machined metallic connector, mechanically fastened to the remainder of the structure. 3D woven connectors and selective Through-Thickness Reinforcement promise to increase the ultimate load that the structure can bear, whilst reducing manufacturing complexity, increasing the load carrying capability and facilitating the automated production of parts of the composite structure. This paper provides an overview of the currently available methods for creating intersections within composite structures and compares them to alternatives involving the use of 3D woven connectors, and the application of selective Through-Thickness Reinforcement for enhanced damage tolerance. The use of tufts is investigated, and their effect on the load carrying ability of the structure is examined. The results of mechanical tests are presented for each of the methods described, and their failure characteristics examined.
Key Words
dry-fibre; T-joints; TTR; tufting; 3D woven; damage tolerance; impact; T-pull; delamination
Address
Harry M. Clegg, Giuseppe Dell:The National Composites Centre, Bristol & Bath Science Park, Bristol, United Kingdom
Ivana K. Partridge: Bristol Composites Institute, The University of Bristol, Bristol, United Kingdom
Abstract
The production of nonwoven fabrics from natural fibers is already expanding at an industrial level for simple curvature semi-structural part in the automotive industry. To develop their use for technical applications, this paper provides an experimental study of the mechanical behavior of flax-fiber nonwoven preforms. A comparison between different sets of carded needle-punched nonwoven has been used to study the influence of manufacturing parameters such as fibers\'directions, the area and the needle punching densities. We have found that the anisotropy observed between both directions can be reduced depending on these parameters. Furthermore, this work investigates the possibility to form double curvature parts such as a hemisphere as well as a more complex shape such as a square box which possesses four triple curvature points. We propose a forming process adapted to the features of the nonwoven structure. The purpose is to determine their behavior under high stress during various forming settings. The preforming tests allowed us to observe in real time the manufacturing defects as well as the high deformability potential of flax nonwoven.
Key Words
nonwoven preform; flax nonwoven; forming; fabric; mechanical characterization
Address
GEMTEX, École nationale supérieure des arts et industries textiles, Allée Louise et Victor Champier,
59056 Roubaix, France
Abstract
This work presents a practical detailed finite element (FE) approach for the three-dimensional (3D) free-vibration analysis of actual aircraft and spacecraft-type lightweight and thin honeycomb sandwich panels. It consists of calling successively in MATLAB, via a developed user-friendly GUI, a detailed 3D meshing tool, a macro-commands language translator and a commercial FE solver (ABAQUS or ANSYS). In contrary to the common practice of meshing finely the faces and core cells, the proposed meshing tool represents each wall of the actual hexagonal core cells as a single two-dimensional (2D) 4 nodes quadrangular shell element or two 3 nodes triangular ones, while the faces meshes are obtained simply using the nodes at the core-faces interfaces. Moreover, as the same 2D FE interpolation type is used for meshing the core and faces, this leads to an automatic handling of their required FE compatibility relations. This proposed approach is applied to a sample made of very thin glass fiber reinforced polymer woven composite faces and a thin aluminum alloy hexagonal honeycomb core. The unknown or incomplete geometric and materials properties are first collected through direct measurements, reverse engineering techniques and experimental-FE modal analysis-based inverse identification. Then, the free-vibrations of the actual honeycomb sandwich panel are analyzed experimentally under different boundary conditions and numerically using different mesh basic cell shapes. It is found that this approach is accurate for the first few modes used for pre-design purpose.
Key Words
free vibration; composite; hexagonal honeycomb; sandwich panel; detailed FE model
Address
Ayech Benjeddou: SUPMECA, 3 rue Fernand Hainaut, 93400 Saint Ouen, France
ROBERVAL FRE 2012 UTC/CNRS, rue Personne de Roberval, 60200 Compiègne, France
Mohamed Guerich: Léonard de Vinci Pôle Universitaire, Research Center, 92 916 Paris La Défense, France