| |
CONTENTS | |
Volume 10, Number 6, June 2016 |
|
- Probabilistic multi-objective optimization of a corrugated-core sandwich structure Abolfazl Khalkhali, Morteza Sarmadi, Sharif Khakshournia and Nariman Jafari
| ||
Abstract; Full Text (1422K) . | pages 709-726. | DOI: 10.12989/gae.2016.10.6.709 |
Abstract
Corrugated-core sandwich panels are prevalent for many applications in industries. The researches performed with the aim of optimization of such structures in the literature have considered a deterministic approach. However, it is believed that deterministic optimum points may lead to high-risk designs instead of optimum ones. In this paper, an effort has been made to provide a reliable and robust design of corrugated-core sandwich structures through stochastic and probabilistic multi-objective optimization approach. The optimization is performed using a coupling between genetic algorithm (GA), Monte Carlo simulation (MCS) and finite element method (FEM). To this aim, Prob. Design module in ANSYS is employed and using a coupling between optimization codes in MATLAB and ANSYS, a connection has been made between numerical results and optimization process. Results in both cases of deterministic and probabilistic multi-objective optimizations are illustrated and compared together to gain a better understanding of the best sandwich panel design by taking into account reliability and robustness. Comparison of results with a similar deterministic optimization study demonstrated better reliability and robustness of optimum point of this study.
Key Words
sandwich structure; corrugated core; optimization; probabilistic; genetic algorithm; finite element method
Address
Automotive Simulation and Optimal Design Research Laboratory, School of Automotive Engineering, Iran University of Science and Technology, Tehran, Iran.
- Effect of soil physical properties on infiltration rate Sayed-Abdul-Hamid Sajjadi, Maryam Mirzaei, Afsaneh Fayyaz Nasab, Amin Ghezelje, Gholamreza Tadayonfar and Hamed Sarkardeh
| ||
Abstract; Full Text (1051K) . | pages 727-736. | DOI: 10.12989/gae.2016.10.6.727 |
Abstract
Excessive rainfall can cause runoff flows over the soil surface and as a consequence some amount of water will infiltrate into the soil. From a hydrologic modeling perspective it is necessary to estimate infiltration rate in order to calculate the actual runoff discharge. There are many parameters that can affect the infiltration rate such as soil texture, moisture and compaction. However, the most common equations used in hydrological calculations for estimating the infiltration rate do not consider the soil properties directly and estimate infiltration rate without any soil properties expressions. The purpose of this research was to investigate the relations between infiltration rate and soil texture, moisture and compaction. To achieve this purpose an experimental study was performed to show the effect of soil properties and their relations on infiltration rate by using non-linear regression.
Key Words
infiltration rate; hydrological calculation; soil texture; soil moisture; soil compaction
Address
Department of Civil Engineering, Faculty of Engineering, Hakim Sabzevari University, Sabzevar, Iran.
- Prediction of load transfer depth for cost-effective design of ground anchors using FBG sensors embedded tendon and numerical analysis Tan Manh Do and Young-Sang Kim
| ||
Abstract; Full Text (2565K) . | pages 737-755. | DOI: 10.12989/gae.2016.10.6.737 |
Abstract
The load transfer depth of a ground anchor is the minimum length required to transfer the initial prestressing to the grout column through the bonded part. A thorough understanding of the mechanism of load transfer as well as accurate prediction of the load transfer depth are essential for designing an anchorage that has an adequate factor of safety and satisfies implicit economic criteria. In the current research, experimental and numerical studies were conducted to investigate the load transfer mechanism of ground anchors based on a series of laboratory and field load tests. Optical FBG sensors embedded in the central king cable of a seven-wire strand were successfully employed to monitor the changes in tensile force and its distribution along the tendons. Moreover, results from laboratory and in-situ pullout tests were compared with those from equivalent case studies simulated using the finite difference method in the FLAC 3D program. All the results obtained from the two proposed methods were remarkably consistent with respect to the load increments. They were similar not only in trend but also in magnitude and showed more consistency at higher pullout loading stages, especially the final loading stage. Furthermore, the estimated load transfer depth demonstrated a pronounced dependency on the surrounding ground condition, being shorter in hard ground conditions and longer in weaker ones. Finally, considering the safety factor and cost-effective design, the required bonded length of a ground anchor was formulated in terms of the load transfer depth.
Key Words
ground anchors; laboratory and field tests; FBG sensors; numerical analysis; load transfer depth
Address
Department of Civil and Environmental Engineering, Chonnam National University, Yeosu 59626, Korea.
- Finite element analysis of a CFRP reinforced retaining wall Ahad Ouria, Vahab Toufigh, Chandrakant Desai, Vahid Toufigh and Hamid Saadatmanesh
| ||
Abstract; Full Text (1876K) . | pages 757-774. | DOI: 10.12989/gae.2016.10.6.757 |
Abstract
Soils are usually weak in tension therefore different materials such as geosynthetics are used to address this inadequacy. Worldwide annual consumption of geosynthetics is close to 1000 million m2, and the value of these materials is probably close to US$1500 million. Since the total cost of the construction is at least four or five times the cost of the geosynthetic itself, the impact of these materials on civil engineering construction is very large indeed. Nevertheless, there are several significant problems associated with geosynthetics, such as creep, low modulus of elasticity, and susceptibility to aggressive environment. Carbon fiber reinforced polymer (CFRP) was introduced over two decades ago in the field of structural engineering that can also be used in geotechnical engineering. CFRP has all the benefits associated with geosynthetics and it boasts higher strength, higher modulus, no significant creep and reliability in aggressive environments. In this paper, the performance of a CFRP reinforced retaining wall is investigated using the finite element method. Since the characterization of behavior of soils and interfaces are vital for reliable prediction from the numerical model, soil and interface properties are obtained from comprehensive laboratory tests. Based on the laboratory results for CFRP, backfill soil, and interface data, the finite element model is used to study the behavior of a CFRP reinforced wall. The finite element model was verified based on the results of filed measurements for a reference wall. Then the reference wall simulated by CFRP reinforcements and the results. The results of this investigations showed that the safety factor of CFRP reinforced wall is more and its deformations is less than those for a retaining wall reinforced with ordinary geosynthetics while their construction costs are in similar range.
Key Words
CFRP; mechanically stabilized earth wall; finite element method; plasticity model
Address
(1) Ahad Ouria:
Department of Civil Engineering, University of Mohaghegh Ardabili, Ardabil, Iran;
(2) Vahab Toufigh:
Department of Civil Engineering, Sharif University of Technology, Tehran, Iran;
(3) Chandrakant Desai, Vahid Toufigh:
Department of Civil Engineering, Graduate University of Advanced Technology, Kerman, Iran;
(4) Hamid Saadatmanesh:
Department of Civil Engineering and Engineering Mechanics, University of Arizona, Tucson, AZ 85721-0072, USA.
- Experimental and numerical analyses on determination of indirect (splitting) tensile strength of cemented paste backfill materials under different loading apparatus Eren Komurlu, Ayhan Kesimal and Serhat Demir
| ||
Abstract; Full Text (2267K) . | pages 775-791. | DOI: 10.12989/gae.2016.10.6.775 |
Abstract
The indirect tensile strengths (ITSs) of different cemented paste backfill mixes with different curing times were determined by considering crack initiation and fracture toughness concepts under different loading conditions of steel loading arcs with various contact angles, flat platens and the standard Brazilian test jaw. Because contact area of the ITS test discs developes rapidly and varies in accordance with the deformability, ITSs of curing materials were not found convenient to determine under the loading apparatus with indefinite contact angle. ITS values increasing with an increase in contact angle can be measured to be excessively high because of the high contact angles resulted from the deformable characteristics of the soft paste backfill materials. As a result of the change of deformation characteristics with the change of curing time, discs have different contact conditions causing an important disadvantage to reflect the strength change due to the curing reactions. In addition to the experimental study, finite element analyses were performed on several types of disc models under various loading conditions. As a result, a comparison between all loading conditions was made to determine the best ITSs of the cemented paste backfill materials. Both experimental and numerical analyses concluded that loading arcs with definite contact angles gives better results than those obtained with the other loading apparatus without a definite contact angle. Loading arcs with the contact angle of 15° was found the most convenient loading apparatus for the typical cemented paste backfill materials, although it should be used carefully considering the failure cracks for a valid test.
Key Words
tensile strength; indirect tensile strength test; splitting method; Brazilian test; paste backfill; finite element analyses
Address
(1) Eren Komurlu, Ayhan Kesimal:
Department of Mining Engineering, Karadeniz Technical University, Trabzon, Turkey;
(2) Serhat Demir:
Department of Civil Engineering, Karadeniz Technical University, Trabzon, Turkey.
- Study properties of soft subgrade soil stabilized by sewage sludge/lime and nano-SiO2 Deng-Fong Lin, Huan-Lin Luo, Chien-Ta Chen and Ming-Du Cai
| ||
Abstract; Full Text (1729K) . | pages 793-806. | DOI: 10.12989/gae.2016.10.6.793 |
Abstract
The pozzolanic characteristics of a sludge incinerated into ash were determined in this study. Lime is commonly used as a stabilizer for the treatment of soils, whereas sewage sludge ash (SSA) is often applied with lime to improve soft subgrade soil. In this study, a cohesive soil categorized as A-4 (low-plasticity clay) by AASHTO classifications was mixed with SSA/lime with a 3:1 ratio. Nano-SiO2 was also added to the soil. To identify changes in the workability, strength, permeability, and shear strength of the soft subgrade soil, basic soil tests were conducted, and the microstructure of the treated soil was analyzed. The results indicate that SSA/lime mixtures improve the properties of soft subgrade soil and transform the soil from \"poor subgrade soil\" to \"good to excellent subgrade soil\" with a CBR > 8. Additionally, the addition of 2% nano-SiO2 increases the unconfined compressive strength of soft subgrade soil treated with SSA/lime mixture by approximately 17 kPa. However, the swelling of the treated soil increased by approximately 0.1% after the addition of nano-SiO2 and lime. Thus, soil swelling should be considered before lime and nano-SiO2 are applied to soft subgrade soil.
Key Words
lime; sewage; sludge ash; soft subgrade soil
Address
(1) Deng-Fong Lin, Huan-Lin Luo, Ming-Du Cai:
Department of Civil and Ecological Engineering, I-Shou University, No. 1, Sec. 1, Syuecheng Rd., Dashu District, Kaohsiung City 84001, Taiwan, R.O.C.;
(2) Chien-Ta Chen:
Department of Civil Engineering, National Central University, No. 300, Jhongda Rd., Jhongli City, Taoyuan County 32001, Taiwan, R.O.C.
- Assessment of the effect of sulfate attack on cement stabilized montmorillonite İrem Kalıpcılar, Ali Mardani-Aghabaglou, Gözde İnan Sezer, Selim Altun and Alper Sezer
| ||
Abstract; Full Text (2029K) . | pages 807-826. | DOI: 10.12989/gae.2016.10.6.807 |
Abstract
In this study, aiming to investigate the effects of sulfate attack on cement stabilized highly plastic clay; an experimental study was carried out considering the effects of cement type, sulfate type and its concentration, cement content and curing period. Unconfined compressive strength and chloride-ion penetration tests were performed to obtain strength and permeability characteristics of specimens cured under different conditions. Test results were evaluated along with microstructural investigations including SEM and EDS analyses. Results revealed that use of sulfate resistance cement instead of normal portland cement is more plausible for soils under the threat of sulfate attack. Besides, it was verified that sulfate concentration is responsible for strength loss and permeability increase in cement stabilized montmorillonite. Finally, empirical equations were proposed to estimate the unconfined compressive strength of cement stabilized montmorillonite, which was exposed to sulfate attack for 28 days.
Key Words
montmorillonite; sulfate attack; cement stabilization; unconfined compressive strength; chloride-ion penetration
Address
(1) İrem Kalıpcılar, Gözde İnan Sezer, Selim Altun, Alper Sezer:
Department of Civil Engineering, Ege University, Bornova, 35040 Bornova/İzmir, Turkey;
(2) Ali Mardani-Aghabaglou:
Department of Civil Engineering, Uludag University, Nilufer/Bursa, Turkey.
- Rate of softening and sensitivity for weakly cemented sensitive clays DongSoon Park
| ||
Abstract; Full Text (1070K) . | pages 827-836. | DOI: 10.12989/gae.2016.10.6.827 |
Abstract
The rate of softening is an important factor to determine whether the failure occurs along localized shear band or in a more diffused manner. In this paper, strength loss and softening rate effect depending on sensitivity are investigated for weakly cemented clays, for both artificially cemented high plasticity San Francisco Bay Mud and low plasticity Yolo Loam. Destructuration and softening behavior for weakly cemented sensitive clays are demonstrated and discussed through multiple vane shear tests. Artificial sensitive clays are prepared in the laboratory for physical modeling or constitutive modeling using a small amount of cement (2 to 5%) with controlled initial water content and curing period. Through test results, shear band thickness is theoretically computed and the rate of softening is represented as a newly introduced parameter, ω80%. Consequently, it is found that the softening rate increases with sensitivity for weakly cemented sensitive clays. Increased softening rate represents faster strength loss to residual state and faster minimizing of shear band thickness. Uncemented clay has very low softening rate to 80% strength drop. Also, it is found that higher brittleness index (Ib) relatively shows faster softening rate. The result would be beneficial to study of physical modeling for sensitive clays in that artificially constructed high sensitivity (up to St = 23) clay exhibits faster strain softening, which results in localized shear band failure once it is remolded.
Key Words
sensitive clay; shear band; strain softening; sensitivity; cemented soil; vane shear; strength loss
Address
K-water Institute, Korea Water Resources Corporation, 125, 1689beon-gil, Yuseong-daero, Yuseong-gu, Daejeon 34045, Republic of Korea.