Techno Press
Tp_Editing System.E (TES.E)
Login Search



    Prof. Yong San Yoon
    Department of Mechanical Engineering
    Korea Advanced Institute of Science & Tech.
    Daejeon 305-701, South Korea
    Prof. Miguel Cerrolaza
    Int'l Center for Numerical Methods in Eng.
    Polytechnic University of Catalonia
    08034 Barcelona, Spain
    Prof. Sukyung Park
    Department of Mechanical Engineering
    KAIST, Science town
    Daejeon, 305-701, South Korea
Regional editors
    Prof. Taiji Adachi
    Dept. of Biomechanics
    Kyoto University
    Kyoto 606-8501, Japan
    Prof. Assad Oberai
    Dept. of Mech., Aerosp. & Nuclear Eng.
    Rensselaer Polytechnic Institute
    Troy, NY 12180, USA
    Prof. Manuel Doblaré
    Abengoa Research
    c/Energía Solar 1, Palmas Altas
    41014 Seville, Spain
Associate Editors
    Prof. Ernst Rank
    Faculty of Civil Engineering and Geodesy
    Technische Universität München
    Arcisstr. 21, 80290 Munich, Germany
    Prof. Anthony Petrella
    Dept. of Mech Eng.
    Colorado School of Mines
    Golden, Co 80401, USA

Managing Editor
    Prof. Chang-Koon Choi
    Korea Advanced Institute of Science & Technology
    Daejeon 305-701, Korea

ISSN:2287-2094(Print) ISSN:2287-2272(Online)

Vol. 2(4 issues) for 2015, Quarterly

Aims and Scope

The Advances in Biomechanics and Applications (ABA), An International Journal, reports the original contributions in applying biomechanics, biomaterials and biomedical principles to biological systems and biological phenomena. These areas are emerging and rapidly growing fields attracting more engineers and specialists in several branches. The journal aims at providing a forum of excellence, based on a widely disseminated publication, for all researchers interested in this interdisciplinary and promising area of engineering and applied sciences. The journal may cover;

- Biomechanics,
- Modeling/simulation/visualization,
- Medical applications,
- Biomedical engineering,
- Biomaterials,
- Medical devices,
- Living tissues/muscles/organs,
- Nerves,
- Fluid/blood dynamics,
- Bone/bone mechanics/ossification,
- Other relevant topics.
Editorial Board

Prof. A Al-Jumaily
Auckland Univ. of Technology
Auckland 92006, New Zealand

Prof. DAG Alvarado
National University of Colombia
Bogotá, Colombia

Prof. D. Ambrosi
Polytechnic of Milan
20133 Milan, Italy

Dr. Raghavendra Angara
Globus Medical Inc
Norristown, PA, USA

Prof. F. Auricchio
University of Pavia
27100 Pavia, Italy

Dr. W Bertucci
University of Reims
Reims 51100, France

Prof. B. Castañeda
Pontificial Catholic University
32 Lima, Perú

Prof. T. David
University of Canterbury
Christchurch, New Zealand

Prof. J. Di Paolo
National University of Entre Ríos
3100 Oro Verde, Argentina

Prof. Agnes Drochon
Universite de Technologie de ompiegne
60200 Compiegne, France

Prof. R Dumas
University Claude Bernard Lyon 1
Villeurbanne 69100, France

Dr. C Falcó
Catholic University of Valencia
Valencia 46003, Spain

Prof. P. Fernandes
echnical University of Lisbon
1049-001 Lisbon, Portugal

Dr. T Franz
University of Cape Town
Cape Town, South Africa

Dr. RECD Gabriel
Univ. of Trás-os-Montes & Alto Douro
Vila Real 5001-801, Portugal

Prof. C. Gasser
Royal Institute of Technology
SE-100 44 Stockholm, Sweden

Prof. M. Gee
Technische Universitat München
80333 München, Germany

Dr. A Gloria
National Research Council
Naples 80125, Italy

Prof. J. Goicolea
Polytechnic University of Madrid
28040 Madrid , Spain

Prof. P. Gomis
Polytechnic Univ. of Catalonia
08034 Barcelona, Spain

Dr. T. Guess
University of Missouri
Kansas City, MO 64110, USA

Prof. S. Gupta
Indian Institute of Technology
West Bengal 721302, India

Prof. M Martín-Landrove
Central University of Venezuela
Caracas, Código Post: 1050, Venezuela

Dr. KJ McQuade
University of Washington
Seattle, WA 98195-5502, USA

Prof. M Mesnard
Université de Bordeaux
33800, Bordeaux, France

Prof. Y Morsi
Swinburne Univ. of Technology
Hawthorn, Victoria 3122, Australia

Dr. S Müftü
Northeastern University
Boston, MA 02115, USA

Prof. R Natarajan
University of Illinois
Chicago, IL 60612, USA

Prof. N. Nuno
Ecole de Technologie Superieure
Montreal, Quebec, H3C 1K3 Canada

Dr. J Pauk
Bialystok Technical University
Bialystok 43201, Spain

Prof. SJ Pearson
University of Salford
Salford, M5 4WT, UK

Prof. D. Pioletti
Ecole Polytechnique Federal
1015 Lausanne, Switzerland

Prof. A Qiao
Beijing University of Technology
Beijing 100124, China

Prof. L Rakotomanana
Université de Rennes 1
35065 Rennes cedex, France

Dr. S Ramtani
University Inst of Tech (IUT)
Saint-Denis Cedex 93200, France

Prof. H. Rodrigues
Instituto Superior Tecnico
1049-001 Lisbon, Portugal

Prof. SMNA Senanayake
University of Brunei
BE1410, Brunei

Prof. S Shefelbine
Northeastern University
Boston, MA 02115, USA

Dr. FC Su
National Cheng Kung University
Tainan, Taiwan

Prof. Z Sun
Curtin University
Perth 6845, Australia

Prof. N Takano
Keio University
Yokohama, 223-8522 Kanagawa Japan

Prof. JMR Tavares
University of Porto
Oporto 4099, Portugal

Dr. R Tiossi
University of São Paulo
Ribeirão Preto 14040-904, Brazil

Prof. Ergin Tonuk
Universities District
06800 Cankaya, Ankara, Turkey

&Dr. W Kim
Technical University of Lisbon
Lisbon 1169, Portugal

Prof. YH Kim
Yonsei University
Wonju 220-710, South Korea

Dr. M Kopernik
AGH Univ of Sci and Tech
Krakow 30-059, Poland

Prof. E. Kuhl
Stanford University
Stanford, CA 94305,USA

Dr. T Lemaire
University of Paris
Paris 75005, France

Prof. Q. Li
University of Sidney
Sydney, N.S.W. 2006, Australia

Dr. T.C. Lim
SIM University
Singapore 599491

Dr. Haojie Mao
Wayne State University
Detroit, MI 48201, USA

Dr. G Vannozzi
University of Rome "Foro Italico"
Rome 00135, Italy

Prof. Y Ventikos
University of Oxford
Oxford, UK

Prof. S Wada
Osaka University
Toyonaka, Japan

Prof. JL Williams
University of Memphis
Memphis, TN 38152, USA

Dr. TCT Wu
Bridgewater State University
Bridgewater, MA 02325, USA

Prof. Z Yosibash
Ben-Gurion Univ. of the Negev Beer-Sheva

Dr. NN Zheng
Univ of N Carolina at Charlotte
Charlotte, NC 28223, USA

Dr. J Zhu
Northwest A&F University
Yangling, 712100, China

Prof. M.C. Ho-Ba-Tho
Université de Technologie
BP 20529-60205 Compiegne,France

Dr. O. Kayabasi
Gebze Institute of Technology
Gebze 41400, Turkey

Prof. H. van Lenthe
University of Leuven
Leuven, Belgium

Prof. B van Rietbergen
Technische Universiteit
Eindhoven, The Netherlands

Dr. R Hambli
University of Orléans
Orléans 45067, France

Dr. MR Torry
Illinois State University
Normal IL 61761, USA
Guide to Authors

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) ( Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. There will be no page charges and no other fees unless the author wishes to provide an open access to his article. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors ( Violation of publication ethics will result in the activation of COPE flow chart. (

7. Publication Fee
Except for open access articles, there is no page charge or article processing fee for submission and publication in this journal.

Table of Contents
  • 2014  Volume 1      No. 1      No.2    No.3    No.4

    2016 Subscription Rates in US$ :

    Advances in Biomechanics and Application Volume 3 (4 issues)

    Print +e

    Online +c

    Print & Online

















    C: Complimentary access N: Not available (N/A)
    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. PRINT & ONLINE: Subscribers have benefits of both subscription categories.

    *: The surface delivery is possible only to the countries listed

    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2017 Techno-Press
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: